How Do We Test Jet Engines?

In previous blogs we have discussed the repair process of our aircraft engines and what it takes to get the engine into good shape. Now let’s talk about the test process for a jet engine.

When do you test a jet engine?

Jet engines are tested on a number of occasions:

  • during engine design and the development process at the manufacturer;
  • during engine installation on the aircraft following maintenance on the wing;
  • following overhaul, repair or inspection in the engine shop.

Engine tests during the design and development process

The manufacturer conducts extensive tests at remote areas both outdoors and indoors in a test facility.

Outdoor engine testing
Outdoor development testing

The tests need to demonstrate that the engine can meet its design goals and withstand events such as:

  • ingestion of debris, dust, sand, etc.;
  • ingestion of hail, snow, ice, etc.;
  • ingestion of excessive amounts of water.

Development tests take several years throughout the entire engine development program and consume a significant part of the total development costs. All of this is necessary to prove the engine meets all the operational and safety requirements.

Indoor development testing of icing conditions

Indoor development testing of icing conditions

On-wing engine testing

Once the aircraft is certified and in operation with the airlines, engines are frequently inspected once the engines have been installed on the wing. At the conclusion of these inspections or after engine replacement, the engines are tested on the wing at various power levels.

Engine tests on-wing are conducted for various reasons and include tests such as:

  • power assurance check, to verify that the engine is capable of producing the required thrust;
  • vibration and balance checks to check and, if necessary, balance the engine rotors;
  • oil and fuel system checks;
  • leakage checks to verify that all systems are free of leakage.

The engine test on-wing are conducted in the open field or in the vicinity of the hangar.

On-wing engine testing KLM aircraft

On wing testing of KLM aircraft

Off-wing engine testing

When an engine is repaired, inspected or overhauled in the engine shop, it requires an extensive series of tests to ensure that the engine is fit for reinstallation again. These tests are much more extensive compared to the on-wing engine tests. After a disassembly and rebuild we want to be absolutely sure the engine meets all the technical requirements and is fit and safe to operate again.

An off-wing engine test is done every five years, more or less, after it reaches the maximum flying hours and is refurbished.

A GE CF6 Engine test in operation in the KLM test facility

A GE CF6 Engine test in operation in the KLM test facility

Where do we test after overhaul?

Post-overhaul engine tests are conducted in a controlled environment called a test cell or test facility. A test cell is a closed facility that is extensively instrumented and calibrated and allows for engines tests regardless the environmental conditions. See the video at the end of this blog.

AIR FRANCE KLM has two modern test facilities in place – at Schiphol Airport and Charles de Gaulle airport – enabling testing of all the engines we maintain, from B737 CFMI CFM56-7B engines up to the B777 GE90 115B engines. In the near future it will include the B787 GEnx engines.

Engine preparation in the KLM test facility.

Engine preparation in the KLM test facility.

Some physics

The main reason to test an engine in a test cell is basically to prove that the engine is capable of providing the minimum required certified engine thrust.

Jet engines develop thrust in accordance with Sir Isaac Newton’s famous third law: When one body exerts a force on a second body, the second body simultaneously exerts a force equal in magnitude and opposite in direction on the first body.

This principle and the forces in flight are depicted in the figure below:

Newton's third law of motion

 

It is a force, which we call thrust, that we are interested in. When testing the engine, we want to be absolutely sure that the engine still develops the amount of thrust that it should, even after it has been completely disassembled and rebuilt.

What happens in a test cell?

In a test cell we simulate the situation of the engine on the aircraft wing. The engine is installed in a thrust frame, similar to the pylon construction of an aircraft where the engine is mounted.

This thrust frame is instrumented to record all the required data needed to monitor a test. It is mounted to the test facility in a locked position to prevent forward motion. During the test, the engine is operated over a range of engine speeds.

Apart from the developed thrust we are also interested in parameters such as:

  • fuel consumption;
  • oil consumption;
  • rotor speeds;
  • vibration levels
  • pressures and temperatures at various locations of the engine.

All this data is constantly tracked and recorded. Once the engine test is completed and all parameters meet the manufacturer’s specifications, the test is finalised. This usually takes up to a few hours.

To be able to store the engine for a longer period and to prevent corrosion in the fuel and oil system, these systems are filled with special fluids containing corrosion inhibitors.

Once finished, the test operator signs off the work, the engine undergoes its final inspection, and is readied for shipment to the aircraft.

Engine test cell
A GE CF6 Engine in the KLM test facility

Some facts and figures

  • At KLM E&M we test about 200 engines each year.
  • An average engine test consumes about 5,000 litres of jet fuel.
  • An entire engine test including all the preparations can take up to 16 hours. The actual test run time takes a few hours depending on the required work.
  • The test facility at Schiphol Airport has been in operation since 1972 and we have conducted over 9,000 engine tests.
  • Inside the building with the engine running at full power, noise levels can increase to 140 decibels (threshold of pain). Outside the building, noise levels are within 60 decibels, well within the environmental requirements.

Watch this video to give you a better understanding of how jet engines are tested.

 

Posted by:   Rob Duivis  | 
Join the conversation Show comments

JO

KLM makes me feel safe they stick to regulations and employ engineers with know-how.

h.v.d.brugh@gmail.com

We as a family go soon on vacation and only like fly with KLM because of safety.

Dennis Heijsteeg

Nice Article Rob!!

Malcolm

What happens to the heat from the engine exhaust at the testing bay, is it used for other purposes, such as central heating of buildings etc?

Rob Duivis

Malcolm,

Good question! Indeed lots of heat is exposed in the test cell exhaust system, most current operating test cells do not have a system in place to recover this heat which of course represents energy. Reason is that it is not easy to convert a current design test cell to recover this energy.
Because the test cell is a total calibrated system, which can’t be changed without huge investments and the test cell being out of order for a long period. In new designed test facilities, energy recovery is considered and offered as an option, energy delivery is however rather intermittent not comparable with conventional energy powerplants.

Rob.

Wood

Short, sweet, to the point, FRxEceEa-tly as information should be!

Geert van Nunen

Testing about 200 engines a year. What is the succes rate of the re-assembled engines? How many of them show issues during the test?

Rob Duivis

Geert,

In general we can fix most issues in the test cell it self, in some occasions the engine is returned to the engineshop to solve an issue.

Bas Voorbrood

Boeiend verhaal Rob. Worden alle KLM motoren op Schiphol getest?

Rob Duivis

Bas,

Alle motortypes die de KLM op Schiphol onderhoudt worden hier ook getest, de overige types worden getest in de test cell van Air France in Parijs.

Onno

Leuk artikel. Doet mij terug denken aan de tijd dat ik werkzaam was op Schiphol Oost. Zou best leuk zijn om weer eens een kijkje te nemen in Hanger 11, gebouw 425 en de motoren afdeling, zoals wij het destijds noemde.

Hippie

Så bra att du kom in =)Noras armar dom har växt som tusan dom senaste da.Honagarn är överallt med dom och får tag i precis allt!!!!!

James legge

Very interesting. Everything looks professional and very clean conditions.

Claudio

Very interesting! Thank you.
How long does a test on-wing usually last? Which is the power-setting?

Rob Duivis

Dear Claudio,

Time to test an engine on wing depends largely on the required level of testing, a leak test at low power takes much less time then for example a test to balance the fan.
The engines are tested at multiple power settings, depending on the type of test, from low power idle settings to very high power assurance runs.

Rob.

Claudio

Hi Rob,
thank for your reply.
Just an example even if I know tha the theme is not so simple as I think.
For a power assurance check of a GE90, what’s the percent of the thrust setting related to the static thrust?
I know that you can set max takeoff thrust for a very short period…is 1 minute enough for a on-wing test?

Thank you
Claudio

R wood

Why do you use ge engines and not rolls Royce

Rob Duivis

Dear mr.wood,

The choice to use GE engines in stead of Rolls Royce engines is not easy to answer, that choice is depending on many factors.
We will operate the Rolls Royce engine however on the Airbus A350 planes.

Richard

We flew from Zurich to Amsterdam on a KLM plane. It was the worst experiaces we have had! Never again on KLM.

John D.

Did a blowout or explosion of a jet engine ever occur during testing?

Rob Duivis

Dear John,

No, explosions or what so ever did not occur in our test facility, as described in the blog, during development testing severe conditions are tested and simulated, but that is not part of post overhaul engine testing as we perform in our facility.

Rob.

willem heitlager

rob dank je voor dit stuk ben nu ruim 8 jaar gedwongen medisch weg bij de klm maar mis het nog elke dag H11+14 dank je wel

Folo

Which of these test is preferred after an overhaul or module swap of an engine: A cell test and on-wing test?

khalid alabsi

This bring good memories for me cuz I have spent almost 32 years of hardwork enjoyment and success working at Saudi Arabian engine test cell facility. Just wanted to share this moment after reading about testing engine broadcast on LinkedIn.
Thank you
Sincerely
Khalid alabsi
Section manager engine testcell

Frank Kaleba

What does a typical 10m x 10m test cell cost?

Talha Ensar Baş

Dear Rob,

Can you suggest a source (paper or book etc.) for aircraft diesel engine testing.

Thanks in advance,

Best Regards,
Talha

Rusty

Hello Rob,

I am very happy I found your blog. Very informative. I am with a company who manufactures a Calibration Fluid that is sold into the Military Markets and some into the Aviation Markets. We sell mostly to the Military world as it is certified to the spec of Mil Prf 7024 Type II.

We sell bulk, drums, and pails as of now. We are trying to figure out where the Commercial Aviation market for this product might be but in order to do so I am wondering what such a product might be used for (specifically).

Just trying to get some info as to the applications and who could possibly use such a product. So far the information I have is that it is use to test Fuel System Components for jet engines but that is relatively vague.

Any help would be greatly appreciated!

Thanks,
Rusty

Amy King

I’m a government contracts manager for an aircraft program for the Air Force. I am very interested in hearing how your purchasing department procures the fuel for testing of these engines. What contract arrangement is used? Any information on purchase of fuel would be greatly appreciated.

Akhil

How is the engine started during the test cell experiment as the starting process in on wing isn’t available during the engine test?

Ajay Chaukulkar

HELLO ROB
I am currently reviewing the Test Cell Report of a CF6-80C2A5 engine tested at your facility in December 2019. I would like your comments on two points below
1. Do you use a ‘Shunt’ during testing at the test cell ? (EGT shunt)
2. Are ambient conditions in the test cell (Temperature, pressure, humidity) corrected to I.S.A. when plotted on the Test Cell computer or Actuals?

Appreciate your reply.
Thank you

best
Ajay

Leave a Reply

Your email address will not be published. Required fields are marked *

Loading